health · infrastructure
the anchor that doesn't go in
Australia put off a stability rule for furniture that tips onto young children and mandated warning labels instead, leaving prevention to wall anchors that many households cannot fit: they need a stud or masonry tools, sometimes a tradesperson, and in some States a landlord's permission; nine in ten businesses checked in 2025 had at least one product breaking the label rule
Source: Australian Competition and Consumer Commission Open ↗source: primaryLast updated: 2026-11-17
Problem statement
Chests of drawers, wardrobes, bookcases and the TVs on them can tip over onto the people beside them. In Australia they have killed at least 28 people since 2000, most often children aged 4 and under, and the ACCC (the national consumer regulator) says they cause nearly 20 injuries a week. Its own commissioned tests found that about 70% of the chests of drawers, wardrobes and shelves sampled would not pass current stability tests. In 2023 the ACCC decided against a stability rule for now, because no suitable standard existed yet, and recommended warning labels instead. The required warnings must tell people, in effect, to "always secure this furniture with an anchor device" (for clothes storage units and bookcases) or "always secure your television with an anchor device" (for TV units). But the ACCC's own analysis says anchoring is "not practically an option for all consumers": it needs a wooden stud or masonry tools, sometimes a paid tradesperson, and in some states the landlord's permission. A Western Australian mother whose 21-month-old son was killed by a chest of drawers in 2015 knew about anchoring and had not been given permission by her landlord. The United States went the other way. After the STURDY Act, the US regulator (CPSC) made a stability standard, ASTM F2057-23, mandatory for clothing storage units from 1 September 2023. It tests the unit itself with loaded, open drawers, on carpet, and with the force of a climbing child. The CPSC had concluded that tip restraints "are not effective as the primary method of preventing CSU tip overs". But stability by design only reaches new furniture. It does nothing for the chests and bookcases already in homes or sold second-hand, and Australia has no such rule yet. The unsolved problem is a way to make storage furniture already in homes safe where the wall anchor does not go in, above all in rented homes.
Why this matters
The ACCC's February 2023 final recommendation reports at least 28 deaths from toppling furniture since 2000, 17 of them children aged 4 and under, and estimates 14 more deaths in the next ten years at the current rate. In Victorian emergency departments, 277 presentations for injuries from selected storage furniture tipping over were recorded from July 2016 to June 2020, 123 of them (44%) children aged 4 and under. In Queensland, from hospitals covering only part of the state (January 2016 – June 2020), the figure was 160 presentations, 96 (60%) in the same age group. In those two states, 17% and 20% of patients were admitted to hospital. Head injuries were the most common. The Queensland Family and Child Commission noted that most children who died in these incidents in Queensland were from low socio-economic backgrounds. The ACCC notes that a tradesperson to fit anchors "may not be affordable" for exactly these households.
What’s been tried and why it hasn’t worked
- Voluntary industry guidance and standards. The National Retail Association issued a best-practice guide in 2016 covering stability, anchoring and education. When the ACCC and state regulators evaluated it in 2019, they found "insufficient uptake". Australia's voluntary stability standard (AS/NZS 4935:2009) is almost never used: the country's only furniture stability laboratory said that since 2009 it had tested to it only for the ACCC and one other client. It estimated that about 75% of furniture on the market would not meet it.
- A stability rule, considered and put off. The ACCC's 2022 options included a mandatory safety standard with stability and anchor requirements. It decided in 2023 that "there are currently no feasible domestic or international stability standards to inform a mandatory safety standard". Its reasons were that the Australian and US standards were under review, about 70% of tested products would fail (risking market disruption), and there was a single testing facility in the country. In January–February 2024 it consulted industry on whether the US standards ASTM F2057-23 (stability of clothing storage units) and ASTM F3096-23 (tip-over restraints) would suit an Australian mandatory standard. No read source shows an Australian stability standard made since.
- Anchors, recommended but not required. The ACCC also decided not to require anchors to be supplied. In its words, anchoring "relies on consumers correctly anchoring the product, which may not occur for a variety of reasons (i.e. no technical capacity or no landlord approval)". It also noted that badly installed anchors "may promote a false sense of security". CHOICE (the national consumer group) reported that only 3% of consumers recalled being told about anchoring at the point of sale. In a 2020 survey of its members and supporters, 58% of the renters who had not anchored furniture or TVs gave as the main reason that the landlord or managing agent did not allow it. No Australian figure for how many homes actually have anchored furniture was found. The US figures are low. A 2018 nationally representative Consumer Reports survey of 1,502 adults, cited by the CPSC, found 27% had anchored any furniture and only 10% of those with a dresser had anchored it. A 2020 CPSC study of 702 parents and caregivers of young children found 55% had ever anchored furniture, renters (51%) less than owners (57%); "it would damage walls" was among the reasons given. The CPSC also found tip-over incidents in which restraints "detached or broke".
- Tenancy-law changes. New South Wales (changes from March 2020), Victoria and Western Australia (nearly half the population) changed tenancy law to make it easier for renters to anchor furniture. Western Australia's 2020 change followed the 2015 death: tenants may ask, and landlords may refuse only in limited cases such as heritage listing or asbestos. Victoria now lets renters fit furniture wall anchors without permission on all surfaces except exposed brick or concrete, where the rental provider cannot refuse without good reason, unless the home is on the Victorian Heritage Register; the renter must restore the wall at the end unless agreed otherwise. These rules remove the landlord barrier. They do not remove the stud, tool and tradesperson barriers. In 2023 the ACCC wrote that there was "no current data about take-up", so the effect "cannot be fully assessed". Rights elsewhere remain "not yet nationally consistent, potentially compounding safety inequality". New South Wales now lists securing furniture to a wall, other than a tiled wall, as a change a landlord may not refuse (heritage and loose-fill-asbestos properties excepted). Queensland's tenancy authority still requires the owner's written approval for any fixture, and its page does not mention furniture. Tasmania introduced a bill in September 2025 to let tenants anchor furniture without the owner's consent where no permanent damage results. The Tasmanian Government announced on 21 August 2026 that Parliament had passed it (the Residential Tenancy Amendment (Safety Modifications) Bill 2025), and a trade-press article reported the same; the tenant must repair any damage at the end of the tenancy. Neither gives a start date.
- A mandatory information standard. The fix that was made is a label rule, the Consumer Goods (Toppling Furniture) Information Standard 2024, in force from 4 May 2025: permanent warning labels on the furniture, warnings at the point of sale in store and online, and information on the toppling risk in the instructions (each of these must cover, in the instrument's words, "the risk of tip overs and the importance of anchoring"). It covers clothing storage units and bookcases 686 mm or taller, entertainment units of any height, and hall tables, display cabinets, buffets and sideboards 686 mm or taller. It does not cover second-hand or resold furniture, and an anchoring pictogram is recommended, not required. In an ACCC and state sweep of more than 3,000 products at more than 160 businesses, reported in November 2025, 90% of businesses had at least one non-compliant product. About 52% had no correct warnings on any toppling product inspected, and 10% were fully compliant. The ACCC said it would consider enforcement. Even full compliance would deliver advice to anchor, which the regulator's own analysis says many households cannot act on.
What would unlock progress
Start from what stability by design leaves: furniture already in homes, second-hand furniture, and renters. The need is a way to stop an existing chest of drawers or bookcase tipping that does not depend on screwing into a stud. It must work on plasterboard, brick and rented walls, must be fitted by an ordinary person without a tradesperson, and must leave a rental wall repairable. Alternatively, a retrofit that makes furniture already in a home resist the forces of a climbing or pulling child by itself, with no wall at all, measured against the US stability tests. The US clothing-storage stability standard (ASTM F2057-23) and tip-restraint standard (ASTM F3096-23) give test loads that a team could use as a benchmark. F3096-23 does not settle the renter's problem, because a tip restraint still has to go into the wall. Its test is a 60 lb static pull on the restraint alone and "does not address the in situ performance" of the restraint. US regulator staff noted in 2015–2016 that the earlier version fixed the restraint to a wooden block, so the wall fixing (for example a plasterboard anchor) "has no strength requirement", and that the test fits only strap-style restraints. F2057-23 covers only clothing storage units and new products.
How we’d know it’s being solved
The primary measure is fewer deaths and emergency-department presentations from toppling storage furniture and TVs, especially in children aged 4 and under: the ACCC's death count (28 since 2000) and the Victorian and Queensland injury-surveillance counts (277 and 160 over four years). The ACCC plans to review the information standard five years after it began, looking at compliance, awareness and injuries. For smaller tests, the measures are: the share of homes with young children where storage furniture is actually restrained (not "aware of anchoring"); the share of those restraints holding a set test load on the wall types renters have; and, for rented homes, whether the wall can be made good when the tenant leaves. Recall of a warning label is a weaker stand-in and should not be the headline result.
Where to start
Facility-free door (wall-and-barrier audit): with adult volunteers who rent, such as students in shared housing or private rentals, record room by room what storage furniture they have, what the wall behind it is made of (plasterboard over stud, plasterboard between studs, brick, concrete), whether a stud is where the furniture stands, whether they hold any landlord permission, and whether they own a drill and stud finder. Deliver a map of which barrier blocks anchoring in which kind of home. No special facility is needed. Use photographs and a knock test, not drilling.
Make-and-test door (renter-fit restraint, bench rig only): tip-restraint kits that screw into a stud are already sold, and so are "no-drill" kits. In one such kit the adhesive holds the plate on the furniture, but the wall bracket still hooks into holes punched by hand in the plasterboard, so "no-drill" does not always mean nothing goes into the wall (no independent strength test of an adhesive kit was found; the kit's instructions and the one consumer test found are listed under Sources). One peel-and-stick anchor is sold with its maker's claims that it "HOLDS UP TO 300 LBS" and is "Easily Removable Leaving No Damage" (TipNot); the maker's page gives no test. Wall-free fixes are sold too: wedges (stoppers) under the front edge, sticky gel mats under the base, and tension poles between the top of the furniture and the ceiling. A Tokyo government product test (run in October 2014, reported in March 2015) shook seven of these on a shaking table with a recorded earthquake. Used alone, every one let the chest or cupboard topple, or slide 30 cm or more (which the test counted as toppling), at the stronger of its two shaking levels; a wedge and a tension pole used together kept a cupboard standing, though the pole's thread broke. That test used earthquake shaking, not a child pulling or climbing, and no figure for those forces was found. A front-foot riser that tilts furniture slightly back has also been described in a published US patent application (US 2021/0353062, 2021; Google Patents lists it as abandoned; the record is listed under Sources). Wall-free designs built into the furniture have been patented: a line with a counterweight through the drawers that stops more than one opening fully (US 12,390,012 B2, 2025), and an expired 1983 patent, for a computer disk-drive cabinet, with a pull-out brace interlocked with the drawer (US 4,372,632). A 2025 drawer-interlock patent (US 12,467,286 B2) is not wall-free: it keeps the drawers locked until a strap is fixed to the wall, baseboard or floor behind the unit. In 2015 CPSC staff tried tool-free anchors on a test wall of plasterboard on timber studs. Ordinary peel-and-stick plastic hooks held a 20 lbf pull for several seconds, and the staff did not find out how long the glue lasts. Three staff prototypes needed no drilling: a metal wedge kicked under the skirting board (it held 50 lb), a hook slid behind the skirting board that does not pierce the wall, and folding legs under the bottom drawer that reach the floor when it opens. Each force was measured once, as a proof of concept, and the staff recommended that industry "consider tool-free anchors and non-destructive anchoring strategies". The CPSC found restraints that detached or broke in real tip-overs. So check what is sold and patented first, and do not copy a strap kit, a wedge, a pole or the CPSC prototypes; start where those tests stopped (repeated and long-term loading, brick and other wall types, legs that deploy by themselves, which the CPSC staff called "very promising"). Make a restraint, or a wall-free retrofit stabiliser, that answers the barriers the ACCC lists: no stud needed, no power tools, a fitting a non-tradesperson gets right first time, and a removal that leaves a rental wall repairable. State in one line how it differs from the screw-in, adhesive and wall-free fixes on sale. Test strength only on a bench rig: a section of plasterboard or brick wall in a workshop, with a dummy load or an empty, ballasted chest of drawers. Apply the load with hung weights or a pull gauge on a line, with the tester standing clear of the fall path, and secure any old furniture with a catch strap or frame so it cannot fall on anyone. Test a commercial adhesive kit and one wall-free fix (for example a wedge plus a tension pole) on the same rig as baselines, since no independent test of these kits under a child's pulling or climbing load was found (the CPSC's 2015 checks used generic hooks and its own prototypes, each loaded once). For a wall-free stabiliser, use the F2057-23 load cases (loaded open drawers, carpet, set test weights) on the bench. Never test with a person, and never with a child, pulling or climbing, and keep children away from every tip test. Then test the fitting, not the tipping, with adult renters at the rig: can they fit it from the instructions alone, how long does it take, and how many fit it wrong? Reach them in a term through student housing (residence halls, shared off-campus houses), a campus or local renters' group, or a makerspace sign-up; a student-housing common room is enough for this part. What carries over to Australia: the wall types, the no-stud and no-tool barriers, and whether the wall can be made good at move-out. What does not carry over directly: the permission rules, which in Australia are set by state tenancy law (for example, Victoria lets renters fit wall anchors without permission except on exposed brick or concrete), so record each volunteer's lease terms rather than assume them.
Design-the-test door (families with young children): whether a restraint is still fitted and holding months later in homes with toddlers is the real outcome. A team should design that follow-up study (sampling homes that rent, what to inspect, how to record wall damage at move-out) and not run it. Any part that involves children or home visits to families needs ethics review.
Relevant skills: product and mechanical design, structural testing, human factors, survey design, housing policy.
Genes
Related problems
Stuck the same way, in other fields.
field: water & energypower for shacks the grid can't reachRegulations keep the grid out of most of South Africa's informal settlements, so solar has to work where the wires can't gobuilt without the people who'd live with itsource: primaryfield: water & energygrants built for big utilitiesFederal resilience grants for water systems are designed for applicants that small utilities cannot be — the cost share alone can exceed a small town's annual budget, and no one tracks who gives upbuilt without the people who'd live with itsource: primaryfield: food & the living worldasbestos-free, says the paperworkEvery internationally trading ship of 500 gross tons or more must certify a hazardous-materials inventory by 26 June 2030 — but the inventory rests on supplier "asbestos-free" declarations, IMO itself says asbestos is still found on ships despite the ban, and in most materials only a laboratory can tellbuilt without the people who'd live with itsource: primaryfield: society & learningsurrounded, and still aloneAfter a spouse dies, the loneliness that tracks grief is the kind more company does not easily fix — and a traditional bereavement group in the one trial that measured both kinds moved neitherbuilt without the people who'd live with itsource: primarySources
- Australian Competition and Consumer Commission, "Toppling furniture decision final recommendation to the Minister", February 2023 (published by the Office of Impact Analysis as "Impact Analysis - Toppling Furiture Info Standard") (the OIA record page is the record of the May 2022 consultation RIS and does not link this PDF), accessed 2026-11-17. Link ↗ Link 2 ↗
- ACCC media release 121/25, "Most furniture suppliers fail mandatory toppling furniture safety rules", 6 November 2025, accessed 2026-11-17. Link ↗
- ACCC consultation "Toppling Furniture Survey – Suitability of ASTM F2057-23" (16 January – 8 February 2024), accessed 2026-11-17. Link ↗
- U.S. Consumer Product Safety Commission, "Safety Standard for Clothing Storage Units", final rule, 87 FR 72598, 25 November 2022, accessed 2026-11-17. Link ↗
- U.S. Consumer Product Safety Commission, "Safety Standard for Clothing Storage Units", direct final rule, 88 FR 28403, 4 May 2023 (effective 1 September 2023), accessed 2026-11-17. Link ↗
- Consumer Affairs Victoria, "Renters making changes to the property", accessed 2026-11-17. Link ↗
- CHOICE, "CHOICE calls for new safety laws to prevent toppling furniture deaths" (last updated 23 Sep 2021), accessed 2026-11-17. Link ↗
- ACCC Product Safety, "Toppling furniture mandatory standard", accessed 2026-11-17. Link ↗
- NSW Government, "Making changes to a rental property", accessed 2026-11-17. Link ↗
- Residential Tenancies Authority (Queensland), "Fixtures and structural changes", accessed 2026-11-17. Link ↗
- Real Estate Business, "Tasmania to protect renters from furniture-caused harm", 26 September 2025, accessed 2026-11-17. Link ↗
- Build Australia, "Tasmanian Parliament passes new safety laws for renters", 24 Aug 2026, accessed 2026-11-17. Link ↗
- Bureau Veritas CPS, "ASTM F3096, Standard Performance Specification for Tipover Restraint(s) Used with Clothing Storage Unit(s) Revised", accessed 2026-11-17. Link ↗
- U.S. Consumer Product Safety Commission, "Staff Briefing Package on Furniture Tipover", September 30, 2016, accessed 2026-11-17. Link ↗
- Butturini R, Massale J, Midgett J, Snyder S. "Preliminary Evaluation of Anchoring Furniture and Televisions Without Tools", CPSC/EXHR/TR—15/001, May 2015 (staff report), accessed 2026-11-17. Link ↗
- 東京都生活文化局消費生活部生活安全課, 商品テスト「家具転倒防止器具の性能」, 平成27年3月 (Tokyo Metropolitan Government product test of furniture anti-toppling devices, March 2015; read in Japanese), accessed 2026-11-17. Link ↗
- Qdos Safety, "Zero-Screw Furniture Anti-Tip Kit" (maker's installation instructions, 2021), accessed 2026-11-17. Link ↗
- CNY Central, "New furniture safety standards begin; consumer reports test anchor kits for best results", November 22, 2024 (a reprint of a Consumer Reports test; supporting), accessed 2026-11-17. Link ↗
- US 2021/0353062 A1, "Furniture and appliance stabilizing apparatus and system to prevent tip-overs" (Giselle F. Nagy; published 2021-11-18; status shown: Abandoned), accessed 2026-11-17. Link ↗
- US 12,390,012 B2, "Anti-tip furniture device" (John J. Nisley; 2025-08-19), accessed 2026-11-17. Link ↗
- US 4,372,632, "Slide interlock and cabinet stabilizer" (Paul Y. Villa, Alvin D. Day; 1983-02-08; status shown: Expired - Fee Related), accessed 2026-11-17. Link ↗
- US 12,467,286 B2, "Drawer interlock systems for furniture" (Caperton Furnitureworks LLC; 2025-11-11), accessed 2026-11-17. Link ↗
- Consumer Goods (Toppling Furniture) Information Standard 2024 (F2024L00512, made 13 April 2024, registered 3 May 2024), accessed 2026-11-17. Link ↗
- TipNot, "Furniture Anchor" (maker's page; claims only), accessed 2026-11-17. Link ↗
- Premier of Tasmania, "Delivering safer rentals for Tasmania" (media release, Guy Barnett, Minister for Small Business, Trade and Consumer Affairs), 21 August 2026 (the live page refuses automated access; read in the Internet Archive copy of 12 October 2026), accessed 2026-11-17. Link ↗ Link 2 ↗
Revision notes
This brief gets checked against its sources and contains the following revisions. Future revisions get added here.
Worth knowing
- No Australian figure for how many homes have anchored furniture was found; the anchoring figures on the page are American.
- Tasmania's new rule letting renters anchor furniture has passed, but no source read gives the date it starts.
Full check
Sources read
- ACCC, toppling furniture final recommendation to the Minister (2023): full text
- Office of Impact Analysis, record page for the toppling-furniture analysis: full text (it is the record of the 2022 consultation paper)
- ACCC media release on the 2025 compliance sweep: full text
- ACCC consultation on the US furniture stability standards (2024): full text
- US CPSC, final rule on clothing storage units (Federal Register, 2022): full text
- US CPSC, direct final rule on clothing storage units (Federal Register, 2023): full text
- Consumer Affairs Victoria, renters making changes to the property: full text
- NSW Government, making changes to a rental property: full text
- Residential Tenancies Authority (Queensland), fixtures and structural changes: full text
- CHOICE, call for toppling furniture safety laws (2021): full text
- ACCC Product Safety, toppling furniture mandatory standard page: full text
- Qdos Safety, anti-tip kit instructions (2021): full text
- CNY Central and KSTP reprints of a Consumer Reports anchor-kit test (2024): full text
- Tokyo Metropolitan Government, product test of furniture anti-toppling devices (2015): full text (read in Japanese)
- Two further Tokyo documents: a 2026 consumer warning and a fire department newsletter: full text (read in Japanese)
- Real Estate Business, Tasmania's bill for renters (2025): full text (read only up to its paywall)
- Build Australia, Tasmanian Parliament passes new safety laws for renters (2026): full text
- Bureau Veritas, summary of the revised US tip-restraint standard ASTM F3096: full text
- US CPSC, staff briefing package on furniture tipover (2016): full text
- US CPSC staff report, anchoring furniture and televisions without tools (2015): full text
- Patent records US 2021/0353062, US 12,467,286, US 12,390,012 and US 4,372,632: full text
- Premier of Tasmania, media release on safer rentals (2026): could not be opened (read later from an archived copy)
What changed
- Not found in the sources, removed: in the build starting point, that a patented front-foot riser tilts furniture back toward the wall; the application says only that it tilts the unit slightly back.
- Numbers: the figure of nearly 20 injuries a week is now given as what the regulator says, not as a count; its own analysis calls its injury figure an estimate.
Left open
- the details of the US tip-restraint test [described from a test laboratory's summary and US regulator staff reports; the standard itself was not read]
Separate check of specific claims: The required warnings are now quoted from the information standard itself, which tells people to secure furniture 'with an anchor device' and does not mention the wall; a peel-and-stick anchor sold with untested maker's claims was added to the build starting point; Tasmania's passage of its renter rule now also rests on the state government's own release; and citations were added to the source list.
Earlier full check: Six details were corrected: a tradesperson is 'sometimes' needed, not 'often' (in the long title too; display title unchanged), the label rule's required information is described as the made standard puts it, the Tokyo test's date and its counting of a long slide as toppling, a front-riser design is a published patent application listed as abandoned, one drawer-interlock patent needs a wall strap, and an expired patent was for a computer disk-drive cabinet.
Separate check of specific claims: A search for existing products and rules added the no-drill and wall-free fixes already sold, a Tokyo government test of wall-free devices under earthquake shaking, US regulator staff tests of tool-free anchors, several patents, the limits of the US tip-restraint test, and tenancy rules in New South Wales, Queensland and Tasmania.
Separate check of specific claims: Entry points: the build starting point now names the adhesive and wall-free fixes already sold, adds a wall-free fix as a second bench baseline, adds safety lines for the bench tests, and says how to reach adult renters.
Earlier full check: Both titles were toned down (display title 'The Anchor That Never Goes In' → 'The Anchor That Doesn't Go In'), several dates and the base of a renters' survey figure were corrected, an unsupported phrase about who rents was removed, and the US move to stability rules for new furniture, with its anchoring figures, was added.